Deadbolts can be keyed on one side with a turn knob on the other, keyed on both sides, Keyed or turn knob on one side only. Your bolt should extend at least 1 inch from the edge of the door. Many older deadbolts have a much shorter "throw" and it is not enough to prevent the door from being pried open. Deadbolt strength is dependent upon the strength of the JAM, or what the bolt goes into. Jams can be reinforced with many products to make it much more difficult for intruder to bypass the lock. http://www.evergoodlocks.com/mechanical-lock/

A pump is any device meant to facilitate the motion of a fluid. Pumps displace fluids, causing it to move down or out of a pipe. Most pumps use some sort of compressional action to displace the fluid. This compressional action sometimes necessitates a motor that acts to put pressure on the fluid in order to displace it. This motor can be powered by a variety of fuels, as long as it has the necessary power to displace the fluid. Most pumps are either positive displacement or rotodynamic. http://www.delinpump.com/sump-pump/

The Auxiliary Equipment like spindle capper is probably the most popular automatic capping machine for screw type caps. This capper receives bottles with caps already set in place and then automatically tightens the caps using several sets of matched spinning disks, or spindle wheels. The capping process will run continuously without bottles stopping for indexing, cap placement or any other reason. http://www.chinacapmachine.com/cap-compression-machine/

A Lift kit is practically a kit that contains the parts needed to lift a specific vehicle model, and instructions on how to do so as well. The contents of the package depend on the model – some kits only contain parts that are difficult to obtain otherwise (generic hardware can be used to complete the lift), while others include a variety of parts, like new suspension, drivetrain parts, drive shafts, etc. http://www.allsuspensions.com/suspension-lift-kits/shock-absorbers/

Without the oil to keep the fuel from burning at a high temperature, the piston will seize up. The metal on the cylinder and the piston will heat and expand to the point where the piston no longer fluidly moves up and down inside the cylinder. This will cause friction inside the cylinder, eventually causing the piston to freeze up or stop moving completely. This will also cause the crankcase to stop turning underneath the piston. When the crankcase stops moving, all other systems shut down instantly. http://www.zjhuaruitools.com/gasoline-chain-saw/

These tools, perhaps, are the most overlooked part of the printing businesses. With all the technology now available, computers are updated and upgraded so often that a 1-month old computer can become obsolete! However, when the correct technology is purchased this problem can be avoided. Another requirement is high quality HD monitor to see every aspect of the graphics and images on screen. This is necessary to avoid wasted material on test prints, color proofing, resolution and sharpness. http://www.yibomachinecn.com/printing-machine/flexo-printing-machine/

We’ve written about the latest in cargo bikes, electric bikes, and artsy bikes created for design shows. But this electric walking bike made us do a double take. The Lopifit bike, by Dutch designer Bruin Bergmeester, is essentially a treadmill on a bike. A 350W Samsung lithium-Ion battery turns the treadmill while you walk, and the treadmill sits on a bike base that’s longer than usual. There’s also no seat—this is a walking-only affair. Bergmeester invented the bike four years ago; it recently began distribution in the U.S., Mexico, and the Caribbean. http://www.wellscooter.com/electric-walking-scooter/

Isolators include an automated bio-decontamination system and are suitable for long-lasting campaigns. A RABS, on the other hand, is an appealing solution for cleanrooms and guaranties the quality needs for applications which require more flexibility. If necessary, a RABS can be opened to allow for process intervention, while the Isolators must be kept closed during the entire operation. http://www.tailinscitech.com/pharma-isolator/