Recent Updates
  • The Power of Metal Catalysts: Unveiling their Role in Chemical Reactions and Industrial Applications
    Introduction Metal catalysts have been a cornerstone of chemical reactions and industrial processes for centuries. These powerful agents facilitate and accelerate various chemical transformations, making them indispensable in numerous sectors, including pharmaceuticals, agriculture, energy, and environmental protection. This article aims to delve into the fascinating world of metal catalysts,...
    0 Comments 0 Shares
  • The Advantages of Catalysts: A Closer Look at Their Impact and Importance
    Introduction Catalysts are substances that increase the rate of chemical reactions without being consumed in the process, making them essential components in various industries, biological systems, and environmental processes. This article aims to explore the numerous advantages of catalysts, their applications, and their significance in our everyday lives.   Accelerating Chemical...
    0 Comments 0 Shares
  • N,N-Diisopropylethylamine CAS7087-68-5
    Rm1104 ,No. 258, West SongXing Road, BaoShan District, Shanghai, China.
    N,N-Diisopropylethylamine CAS7087-68-5


    N,N-Diisopropylethylamine
    N-Ethyldiisopropylamine,
    3-METHYL-1-BUTINE-3-OL;
    BIOTECHGRADESOLVENT,99.5%;
    DIPEA,
    Ethyldiisopropylamine,
    Hünig’s base


    CAS Number:7087-68-5
    EC Number:230-392-0
    MDL number:MFCD00008868



    Appearance Colorless to Light yellow clear liquid
    Purity(GC) min. 99.0 %
    Quality Level 200
    Assay ≥99%
    form liquid
    refractive index n20/D 1.414 (lit.)
    Melting Point -45 °C
    Boiling Point 127 °C
    density 0.742 g/mL at 25 °C (lit.)
    Specific Gravity 0.92
    Molecular Formula / Molecular Weight C8H19N = 129.25
    Flash point 12 °C
    Refractive Index 1.41
    Solubility in water Insoluble
    Solubility (soluble in) Alcohol
    Condition to Avoid Air Sensitive
    CAS 7087-68-5
    MDL Number MFCD00008868
    Explosion limit 0.7 - 6.3 %(V)
    pH value 12.3 (H₂O, 20 °C) (as an emulsion)
    Viscosity kinematic 0.88 mm2/s (20 °C)
    Vapor pressure 14 hPa (20 °C)
    HS Code 2921 19 99

    General description
    N,N-Diisopropylethylamine, also known as Hünig′s base, is a sterically hindered amine. It is a non-nucleophilic base commonly employed for substitution reactions.It acts as an activator for chiral iridium N, P ligand complexes, which can be utilized in the hydrogenation of α, β-unsaturated nitriles. The influence of varying concentration of N,N-diisopropylethylamine on the synthesis of olvanil in the presence of lipase catalyst has been investigated.

    Application
    N,N-Diisopropylethylamine may be used in the synthesis of mannosylated ovalbumin peptides.
    TBDPS protection of Alcohols using tert-Butylchlorodiphenylsilane.
    BOM protection of Alcohols using Benzyloxymethyl Chloride.

    Storage and transportation:
    Should be sealed and stored in a dry, cool and ventilated warehouse

    Package:
    200KG/drum Storage: It is recommended to store in dry and cool area with proper ventilation. Please fasten the lid as soon as possible after original packing to prevent the mixing of other substances such as moisture from affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits.
    https://www.newtopchem.com/archives/43095
    Email us: info@newtopchem.com
    N,N-Diisopropylethylamine CAS7087-68-5 N,N-Diisopropylethylamine N-Ethyldiisopropylamine, 3-METHYL-1-BUTINE-3-OL; BIOTECHGRADESOLVENT,99.5%; DIPEA, Ethyldiisopropylamine, Hünig’s base CAS Number:7087-68-5 EC Number:230-392-0 MDL number:MFCD00008868 Appearance Colorless to Light yellow clear liquid Purity(GC) min. 99.0 % Quality Level 200 Assay ≥99% form liquid refractive index n20/D 1.414 (lit.) Melting Point -45 °C Boiling Point 127 °C density 0.742 g/mL at 25 °C (lit.) Specific Gravity 0.92 Molecular Formula / Molecular Weight C8H19N = 129.25 Flash point 12 °C Refractive Index 1.41 Solubility in water Insoluble Solubility (soluble in) Alcohol Condition to Avoid Air Sensitive CAS 7087-68-5 MDL Number MFCD00008868 Explosion limit 0.7 - 6.3 %(V) pH value 12.3 (H₂O, 20 °C) (as an emulsion) Viscosity kinematic 0.88 mm2/s (20 °C) Vapor pressure 14 hPa (20 °C) HS Code 2921 19 99 General description N,N-Diisopropylethylamine, also known as Hünig′s base, is a sterically hindered amine. It is a non-nucleophilic base commonly employed for substitution reactions.It acts as an activator for chiral iridium N, P ligand complexes, which can be utilized in the hydrogenation of α, β-unsaturated nitriles. The influence of varying concentration of N,N-diisopropylethylamine on the synthesis of olvanil in the presence of lipase catalyst has been investigated. Application N,N-Diisopropylethylamine may be used in the synthesis of mannosylated ovalbumin peptides. TBDPS protection of Alcohols using tert-Butylchlorodiphenylsilane. BOM protection of Alcohols using Benzyloxymethyl Chloride. Storage and transportation: Should be sealed and stored in a dry, cool and ventilated warehouse Package: 200KG/drum Storage: It is recommended to store in dry and cool area with proper ventilation. Please fasten the lid as soon as possible after original packing to prevent the mixing of other substances such as moisture from affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits. https://www.newtopchem.com/archives/43095 Email us: info@newtopchem.com
    Type
    New
    Price
    Rs.10 (PKR)
    Status
    In stock
    0 Comments 0 Shares
  • 2-Isopropylphenol CAS88-69-7
    Rm1104 ,No. 258, West SongXing Road, BaoShan District, Shanghai, China.
    2-Isopropylphenol CAS88-69-7

    2-Isopropylphenol
    CAS:88-69-7
    Molecular formula: C9H12O
    EINECS号:201-852-8
    prodox131
    O-CUMENOL
    O-ISOPROPYLPHENOL
    ORTHO-ISO-PROPYLPHENOL
    FEMA 3461
    RTECS号:SL5900000

    29071900
    UN 3145
    Hazard class 8
    Packing Group II

    ECHA EINECS - REACH Pre-Reg: 201-852-8
    FDA UNII: B2899Z0Q2U
    Beilstein Number: 1363322
    MDL: MFCD00002224
    CoE Number: 11234
    XlogP3: 2.90 (est)
    Molecular Weight: 136.19384000
    Formula: C9 H12 O

    Appearance: colorless to pale orange clear liquid (est)
    Assay: 98.00 to 100.00
    Food Chemicals Codex Listed: No
    Specific Gravity: 0.98900 to 0.99900 @ 25.00 °C.
    Pounds per Gallon - (est).: 8.229 to 8.313
    Refractive Index: 1.52500 to 1.53000 @ 20.00 °C.
    Melting Point: 14.00 to 16.00 °C. @ 760.00 mm Hg
    Boiling Point: 212.00 to 214.00 °C. @ 760.00 mm Hg
    Vapor Pressure: 0.112000 mmHg @ 25.00 °C. (est)
    Flash Point: 192.00 °F. TCC ( 88.89 °C. )

    Product Number I0173
    Purity / Analysis Method >98.0%(GC)
    Physical State (20 deg.C) Liquid
    Store Under Inert Gas Store under inert gas
    Condition to Avoid Air Sensitive
    CAS RN 88-69-7
    PubChem Substance ID 87571558
    SDBS (AIST Spectral DB) 2344

    Transport Information:
    UN Number (DOT-AIR) UN3145
    Class (DOT-AIR) 8
    Packing Group (TCI-A) III
    HS Number 2907.19.2000


    Storage and transportation:
    Should be sealed and stored in a dry, cool and ventilated warehouse

    Package:
    200KG/drum Storage: It is recommended to store in dry and cool area with proper ventilation. Please fasten the lid as soon as possible after original packing to prevent the mixing of other substances such as moisture from affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits.
    https://www.newtopchem.com/archives/43088
    Email us: info@newtopchem.com
    2-Isopropylphenol CAS88-69-7 2-Isopropylphenol CAS:88-69-7 Molecular formula: C9H12O EINECS号:201-852-8 prodox131 O-CUMENOL O-ISOPROPYLPHENOL ORTHO-ISO-PROPYLPHENOL FEMA 3461 RTECS号:SL5900000 29071900 UN 3145 Hazard class 8 Packing Group II ECHA EINECS - REACH Pre-Reg: 201-852-8 FDA UNII: B2899Z0Q2U Beilstein Number: 1363322 MDL: MFCD00002224 CoE Number: 11234 XlogP3: 2.90 (est) Molecular Weight: 136.19384000 Formula: C9 H12 O Appearance: colorless to pale orange clear liquid (est) Assay: 98.00 to 100.00 Food Chemicals Codex Listed: No Specific Gravity: 0.98900 to 0.99900 @ 25.00 °C. Pounds per Gallon - (est).: 8.229 to 8.313 Refractive Index: 1.52500 to 1.53000 @ 20.00 °C. Melting Point: 14.00 to 16.00 °C. @ 760.00 mm Hg Boiling Point: 212.00 to 214.00 °C. @ 760.00 mm Hg Vapor Pressure: 0.112000 mmHg @ 25.00 °C. (est) Flash Point: 192.00 °F. TCC ( 88.89 °C. ) Product Number I0173 Purity / Analysis Method >98.0%(GC) Physical State (20 deg.C) Liquid Store Under Inert Gas Store under inert gas Condition to Avoid Air Sensitive CAS RN 88-69-7 PubChem Substance ID 87571558 SDBS (AIST Spectral DB) 2344 Transport Information: UN Number (DOT-AIR) UN3145 Class (DOT-AIR) 8 Packing Group (TCI-A) III HS Number 2907.19.2000 Storage and transportation: Should be sealed and stored in a dry, cool and ventilated warehouse Package: 200KG/drum Storage: It is recommended to store in dry and cool area with proper ventilation. Please fasten the lid as soon as possible after original packing to prevent the mixing of other substances such as moisture from affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits. https://www.newtopchem.com/archives/43088 Email us: info@newtopchem.com
    Type
    New
    Price
    Rs.10 (PKR)
    Status
    In stock
    0 Comments 0 Shares
  • 2-(1-methylpropyl)phenol CAS89-72-5 2-sec-buty phenol
    Rm1104 ,No. 258, West SongXing Road, BaoShan District, Shanghai, China.
    2-(1-methylpropyl)phenol CAS89-72-5 2-sec-buty phenol

    2-(1-methylpropyl)phenol
    2-sec-buty phenol
    O-S-BUTYLPHENOL;
    ORTHO-SEC-BUTYLPHENOL;
    OSBP
    1-(1-Methylpropyl)phenol;
    Phenol, o-sec-butyl-;
    Phenol,2-(1-methylpropyl)

    CAS No. 89-72-5
    Molecular formula C10H14O
    EINECS No. 201-933-8
    Hazardous material transport number UN 3145
    RTECS No. SJ8920000
    Hazard class 8
    Packing group III
    Customs code 29071910


    Product Number B0732
    Purity / Analysis Method >97.0%(GC)
    Molecular Formula / Molecular Weight C10H14O = 150.22 
    Physical State (20 deg.C) Liquid
    Store Under Inert Gas Store under inert gas
    Condition to Avoid Air Sensitive
    CAS RN 89-72-5
    Reaxys Registry Number 1210026
    PubChem Substance ID 87563733
    SDBS (AIST Spectral DB) 1789
    MDL Number MFCD00002225
    Specifications
    Appearance White to Light yellow powder to crystal
    Properties (reference)
    Melting Point 14 °C
    Boiling Point 228 °C
    Flash point 102 °C
    Specific Gravity (20/20) 0.98
    Refractive Index 1.52
    Solubility in water Insoluble
    Solubility (soluble in) Alcohol, Ether
    Transport Information:
    UN Number (DOT-AIR) UN3145
    Class (DOT-AIR) 8
    Packing Group (TCI-A) III
    HS Number 2907.19.2000

    Storage and transportation:
    Should be sealed and stored in a dry, cool and ventilated warehouse

    Package:
    200KG/drum Storage: It is recommended to store in dry and cool area with proper ventilation. Please fasten the lid as soon as possible after original packing to prevent the mixing of other substances such as moisture from affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits.

    https://www.newtopchem.com/archives/43085

    Email us: info@newtopchem.com
    2-(1-methylpropyl)phenol CAS89-72-5 2-sec-buty phenol 2-(1-methylpropyl)phenol 2-sec-buty phenol O-S-BUTYLPHENOL; ORTHO-SEC-BUTYLPHENOL; OSBP 1-(1-Methylpropyl)phenol; Phenol, o-sec-butyl-; Phenol,2-(1-methylpropyl) CAS No. 89-72-5 Molecular formula C10H14O EINECS No. 201-933-8 Hazardous material transport number UN 3145 RTECS No. SJ8920000 Hazard class 8 Packing group III Customs code 29071910 Product Number B0732 Purity / Analysis Method >97.0%(GC) Molecular Formula / Molecular Weight C10H14O = 150.22  Physical State (20 deg.C) Liquid Store Under Inert Gas Store under inert gas Condition to Avoid Air Sensitive CAS RN 89-72-5 Reaxys Registry Number 1210026 PubChem Substance ID 87563733 SDBS (AIST Spectral DB) 1789 MDL Number MFCD00002225 Specifications Appearance White to Light yellow powder to crystal Properties (reference) Melting Point 14 °C Boiling Point 228 °C Flash point 102 °C Specific Gravity (20/20) 0.98 Refractive Index 1.52 Solubility in water Insoluble Solubility (soluble in) Alcohol, Ether Transport Information: UN Number (DOT-AIR) UN3145 Class (DOT-AIR) 8 Packing Group (TCI-A) III HS Number 2907.19.2000 Storage and transportation: Should be sealed and stored in a dry, cool and ventilated warehouse Package: 200KG/drum Storage: It is recommended to store in dry and cool area with proper ventilation. Please fasten the lid as soon as possible after original packing to prevent the mixing of other substances such as moisture from affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits. https://www.newtopchem.com/archives/43085 Email us: info@newtopchem.com
    Type
    New
    Price
    Rs.10 (PKR)
    Status
    In stock
    0 Comments 0 Shares
  • Methylcyclohexane CAS108-87-2
    Rm1104 ,No. 258, West SongXing Road, BaoShan District, Shanghai, China.
    Methylcyclohexane CAS108-87-2
    Cyclohxylmethane;
    heptanaphthene;
    methyl-cyclohexan;
    methylecyclohexane;
    Metylocykloheksan

    RTECS No. GV6125000
    Molecular Formula C7H14
    CAS No. 108-87-2
    EINECS No. 203-624-3
    UN Dangerous Goods Code (UN No.): 2296
    Shipping name: Methylcyclohexane
    Hazardous classification :3
    Packing Group II
    Customs code 2902 19 00
    grade anhydrous
    Quality Level 100
    vapor density 3.4 (vs air)
    vapor pressure 37 mmHg ( 20 °C)
    83.2 mmHg ( 37.7 °C)
    Assay ≥99%
    form liquid
    autoignition temp. 545 °F
    impurities <0.002% water
    <0.005% water (100 mL pkg)
    evapn. residue <0.0005%
    refractive index n20/D 1.422 (lit.)
    bp 101 °C (lit.)
    mp −126 °C (lit.)
    density 0.77 g/mL at 25 °C (lit.)
    SMILES string CC1CCCCC1
    InChI 1S/C7H14/c1-7-5-3-2-4-6-7/h7H,2-6H2,1H3
    InChI key UAEPNZWRGJTJPN-UHFFFAOYSA-N


    Application
    Methylcyclohexane may be used as a solvent for the synthesis of unsolvated n-butylmagnesium chloride by the reaction of 1-chlorobutane with magnesium powder. It may also be used as the starting material to synthesize 1-methylcyclohexanecarboxylic acid.
    Pharmaceutical intermediates. Methylcyclohexane is an important organic solvent and extractant, which can be used as a solvent for rubber, paint, varnish (some paint solvents also use methylcyclohexane), and can be used as oil extractant. Methylcyclohexane can be used in organic synthesis as solvent and analytical reagent. In addition, methylcyclohexane can also be used as a standard for thermometer calibration. The correction solution is usually made of methylcyclohexane as the main component.



    Description
    Catalogue Number 806147
    Description Methylcyclohexane
    Product Information
    CAS number 108-87-2
    EC index number 601-018-00-7
    EC number 203-624-3
    Hill Formula C₇H₁₄
    Chemical formula C₆H₁₁CH₃
    Molar Mass 98.19 g/mol
    HS Code 2902 19 00
    Structure formula Image
    Quality Level MQ200
    Physicochemical Information
    Appearance Form:
    liquid
    Color: colorless
    Explosion limit 1.1 - 6.7 %(V)
    Flash point -4 °C
    Ignition temperature 260 °C
    Melting Point -126.6 °C
    Solubility 0.014 g/l
    Initial boiling point and boiling range 101 °C 214 °F - lit.
    Upper/lower flammability or explosive limits Upper explosion limit: 6.7 %(V) Lower explosion limit: 1.1 %(V)
    Toxicological Information
    LD 50 dermal LD50 Rabbit > 86000 mg/kg
    Safety Information according to GHS
    Hazard Pictogram(s)

    Hazard Statement(s) H225: Highly flammable liquid and vapour.
    H304: May be fatal if swallowed and enters airways.
    H315: Causes skin irritation.
    H336: May cause drowsiness or dizziness.
    H410: Very toxic to aquatic life with long lasting effects.
    Precautionary Statement(s) P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
    P233: Keep container tightly closed.
    P273: Avoid release to the environment.
    P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor.
    P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.
    P331: Do NOT induce vomiting.
    P403 + P233: Store in a well-ventilated place. Keep container tightly closed.
    Signal Word Danger
    RTECS GV6125000
    Storage class 3 Flammable liquids
    WGK WGK 2 obviously hazardous to water
    Safety Information
    Categories of danger highly flammable, irritant, harmful, dangerous for the environment
    Storage and Shipping Information
    Storage Store below +30°C.
    Transport Information
    Declaration (railroad and road) ADR, RID UN 2296 , 3, II
    Declaration (transport by air) IATA-DGR UN 2296 , 3, II
    Declaration (transport by sea) IMDG-Code UN 2296 , 3, II
    Specifications
    Assay (GC, area%) ≥ 99 %
    Density (d 20 °C/ 4 °C) 0.769 - 0.770
    Identity (IR) passes test

    Storage and transportation:
    Should be sealed and stored in a dry, cool and ventilated warehouse

    Package:
    200KG/drum Storage: It is recommended to store in dry and cool area with proper ventilation. Please fasten the lid as soon as possible after original packing to prevent the mixing of other substances such as moisture from affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits.
    https://www.newtopchem.com/archives/43090
    Email us: info@newtopchem.com
    Methylcyclohexane CAS108-87-2 Cyclohxylmethane; heptanaphthene; methyl-cyclohexan; methylecyclohexane; Metylocykloheksan RTECS No. GV6125000 Molecular Formula C7H14 CAS No. 108-87-2 EINECS No. 203-624-3 UN Dangerous Goods Code (UN No.): 2296 Shipping name: Methylcyclohexane Hazardous classification :3 Packing Group II Customs code 2902 19 00 grade anhydrous Quality Level 100 vapor density 3.4 (vs air) vapor pressure 37 mmHg ( 20 °C) 83.2 mmHg ( 37.7 °C) Assay ≥99% form liquid autoignition temp. 545 °F impurities <0.002% water <0.005% water (100 mL pkg) evapn. residue <0.0005% refractive index n20/D 1.422 (lit.) bp 101 °C (lit.) mp −126 °C (lit.) density 0.77 g/mL at 25 °C (lit.) SMILES string CC1CCCCC1 InChI 1S/C7H14/c1-7-5-3-2-4-6-7/h7H,2-6H2,1H3 InChI key UAEPNZWRGJTJPN-UHFFFAOYSA-N Application Methylcyclohexane may be used as a solvent for the synthesis of unsolvated n-butylmagnesium chloride by the reaction of 1-chlorobutane with magnesium powder. It may also be used as the starting material to synthesize 1-methylcyclohexanecarboxylic acid. Pharmaceutical intermediates. Methylcyclohexane is an important organic solvent and extractant, which can be used as a solvent for rubber, paint, varnish (some paint solvents also use methylcyclohexane), and can be used as oil extractant. Methylcyclohexane can be used in organic synthesis as solvent and analytical reagent. In addition, methylcyclohexane can also be used as a standard for thermometer calibration. The correction solution is usually made of methylcyclohexane as the main component. Description Catalogue Number 806147 Description Methylcyclohexane Product Information CAS number 108-87-2 EC index number 601-018-00-7 EC number 203-624-3 Hill Formula C₇H₁₄ Chemical formula C₆H₁₁CH₃ Molar Mass 98.19 g/mol HS Code 2902 19 00 Structure formula Image Quality Level MQ200 Physicochemical Information Appearance Form: liquid Color: colorless Explosion limit 1.1 - 6.7 %(V) Flash point -4 °C Ignition temperature 260 °C Melting Point -126.6 °C Solubility 0.014 g/l Initial boiling point and boiling range 101 °C 214 °F - lit. Upper/lower flammability or explosive limits Upper explosion limit: 6.7 %(V) Lower explosion limit: 1.1 %(V) Toxicological Information LD 50 dermal LD50 Rabbit > 86000 mg/kg Safety Information according to GHS Hazard Pictogram(s) Hazard Statement(s) H225: Highly flammable liquid and vapour. H304: May be fatal if swallowed and enters airways. H315: Causes skin irritation. H336: May cause drowsiness or dizziness. H410: Very toxic to aquatic life with long lasting effects. Precautionary Statement(s) P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233: Keep container tightly closed. P273: Avoid release to the environment. P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor. P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. P331: Do NOT induce vomiting. P403 + P233: Store in a well-ventilated place. Keep container tightly closed. Signal Word Danger RTECS GV6125000 Storage class 3 Flammable liquids WGK WGK 2 obviously hazardous to water Safety Information Categories of danger highly flammable, irritant, harmful, dangerous for the environment Storage and Shipping Information Storage Store below +30°C. Transport Information Declaration (railroad and road) ADR, RID UN 2296 , 3, II Declaration (transport by air) IATA-DGR UN 2296 , 3, II Declaration (transport by sea) IMDG-Code UN 2296 , 3, II Specifications Assay (GC, area%) ≥ 99 % Density (d 20 °C/ 4 °C) 0.769 - 0.770 Identity (IR) passes test Storage and transportation: Should be sealed and stored in a dry, cool and ventilated warehouse Package: 200KG/drum Storage: It is recommended to store in dry and cool area with proper ventilation. Please fasten the lid as soon as possible after original packing to prevent the mixing of other substances such as moisture from affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits. https://www.newtopchem.com/archives/43090 Email us: info@newtopchem.com
    Type
    New
    Price
    Rs.10 (PKR)
    Status
    In stock
    0 Comments 0 Shares
  • Isooctanoic acid CAS25103-52-0
    Rm1104 ,No. 258, West SongXing Road, BaoShan District, Shanghai, China.
    Isooctanoic acid CAS25103-52-0
    Product Details
    Chinese name:Isooctanoic acid English name:Isooctanoicacid
    CAS:25103-52-0
    Storage condition:Dry and sealed
    Purity specification:99% Product category:Chemical raw materials
    Isooctanoic acid is the main product of our company. Our company has been committed to providing high service, low monohybrid, high content products for the field of biochemical research, to provide service solutions for the majority of researchers engaged in research, is a large integrated supplier of biological raw materials, chemical raw materials research and development and production, welcome your inquiry and purchase.

    Isooctanoic acid
    Chinese name:2-ethylhexanoic acid
    Synonyms:2-Ethylhexanoic acid;2-ethylhexanoic acid;secoctanoic acid,isooctanoic acid;2-ethylhexanoic acid;2-ethylhexanoic acid;German oxea isooctanoic acid;isooctanoic acid\;secoctanoic acid;German OXEA.
    English name:Isooctanoicacid
    English Synonyms:Isocaprylicacid;Isooctylacid;Isooctansure;I-OCTANOICACID;2-Ethylhexanoicacid;Isooctanoicacid;Isooctanoicacid/2- Ethylhexanoicacid;CecanoicC8acid
    CAS No.:25103-52-0
    Molecular formula:C8H16O2
    Molecular weight:144.21
    EINECS:246-617-0
    Property:It is a colorless liquid
    Content:99%
    Packing:185kg plastic drum
    Solubility: slightly soluble in cold water, soluble in hot water and ether, slightly soluble in ethanol.
    Use:Used in organic synthesis industry.
    https://www.newtopchem.com/archives/42950
    Technical and business contact number:Manager Wu +86-183-0190-3156
    Isooctanoic acid CAS25103-52-0 Product Details Chinese name:Isooctanoic acid English name:Isooctanoicacid CAS:25103-52-0 Storage condition:Dry and sealed Purity specification:99% Product category:Chemical raw materials Isooctanoic acid is the main product of our company. Our company has been committed to providing high service, low monohybrid, high content products for the field of biochemical research, to provide service solutions for the majority of researchers engaged in research, is a large integrated supplier of biological raw materials, chemical raw materials research and development and production, welcome your inquiry and purchase. Isooctanoic acid Chinese name:2-ethylhexanoic acid Synonyms:2-Ethylhexanoic acid;2-ethylhexanoic acid;secoctanoic acid,isooctanoic acid;2-ethylhexanoic acid;2-ethylhexanoic acid;German oxea isooctanoic acid;isooctanoic acid\;secoctanoic acid;German OXEA. English name:Isooctanoicacid English Synonyms:Isocaprylicacid;Isooctylacid;Isooctansure;I-OCTANOICACID;2-Ethylhexanoicacid;Isooctanoicacid;Isooctanoicacid/2- Ethylhexanoicacid;CecanoicC8acid CAS No.:25103-52-0 Molecular formula:C8H16O2 Molecular weight:144.21 EINECS:246-617-0 Property:It is a colorless liquid Content:99% Packing:185kg plastic drum Solubility: slightly soluble in cold water, soluble in hot water and ether, slightly soluble in ethanol. Use:Used in organic synthesis industry. https://www.newtopchem.com/archives/42950 Technical and business contact number:Manager Wu +86-183-0190-3156
    Type
    New
    Price
    Rs.10 (PKR)
    Status
    In stock
    0 Comments 0 Shares
  • Octanedioic acid CAS 68937-75-7 Nonanoic acid
    Rm1104 ,No. 258, West SongXing Road, BaoShan District, Shanghai, China.
    Octanedioic acid CAS 68937-75-7 Nonanoic acid
    Common name Octanedioic acid English name Nonanoic acid
    CAS No. 68937-75-7
    Molecular weight 158.23800
    Density N/A Boiling point 254.5ºC
    Molecular formula C9H18O2 Melting point 12.4ºC
    MSDS US version
    Flash point N/A
    Synonyms: Caprylic acid (8-10 acid, C8C10 acid); 810 mixed acid; Caprylic acid C8-10; Caprylic acid C8-10,68937-75-7; Fatty acid C8C10 (caprylic acid); 810 acid; C8-10 acid; Caprylic acid
    CAS:68937-75-7;
    EINECS: 273-086-2
    C810 acid: Caprylic-CapricAcidBlend; Caprylic/CapricAcid; Octanoic/DecanoicAcid
    English Name:FattyAcidsC8C10;CAPRYLIC/CAPRICACID; Octanoic/DecanoicAcid/FattyAcidC8-C10

    Molecular Formula:
    C8H16O2+C10H20O2;

    Properties:
    Light amber to colourless clarified liquid with an oily odour.

    Parameters:
    Content >99.9%, Acid value/360, Saponification value/361, Iodine value/0.18, Fatty acid composition: C8 is 59.5, C10 is 40.1.
    Name of octanedecanoic acid
    Chinese name Octanedioic acid
    English name Nonanoic acid
    Physical and chemical properties of octanedecanoic acid
    Boiling point 254.5ºC
    Melting point 12.4ºC
    Molecular formula C9H18O2
    Molecular weight 158.23800
    Precise mass 158.13100
    PSA 37.30000
    LogP 2.82160
    Octanedioic Acid Safety Information
    Customs code 2942000000
    Octanedioic acid Customs
    Customs Code 2942000000
    Fatty acids are a class of carboxylic acid compounds consisting of hydrocarbon groups linked to carboxylic acids. They are widely used as raw materials in various industries and as intermediate products in the chemical synthesis of antibacterial pesticides and other products.
    It is used as a raw material for plasticizers, stabilizers and flame retardants in the plastics industry; lubricants, rust inhibitors and hydraulic fluids in the petroleum and metalworking industries; surfactants for textile coatings and mineral processing; the production of alkyl chlorides of agricultural products, methyl octanoate; and synthetic triglycerides of caprylicacid, pentaerythritol esters and polyol esters as metal lubricants, lubricants and emollients for personal care products.
    https://www.newtopchem.com/archives/42953
    Technical and business contact number: Manager Wu +86-183-0190-3156
    Octanedioic acid CAS 68937-75-7 Nonanoic acid Common name Octanedioic acid English name Nonanoic acid CAS No. 68937-75-7 Molecular weight 158.23800 Density N/A Boiling point 254.5ºC Molecular formula C9H18O2 Melting point 12.4ºC MSDS US version Flash point N/A Synonyms: Caprylic acid (8-10 acid, C8C10 acid); 810 mixed acid; Caprylic acid C8-10; Caprylic acid C8-10,68937-75-7; Fatty acid C8C10 (caprylic acid); 810 acid; C8-10 acid; Caprylic acid CAS:68937-75-7; EINECS: 273-086-2 C810 acid: Caprylic-CapricAcidBlend; Caprylic/CapricAcid; Octanoic/DecanoicAcid English Name:FattyAcidsC8C10;CAPRYLIC/CAPRICACID; Octanoic/DecanoicAcid/FattyAcidC8-C10 Molecular Formula: C8H16O2+C10H20O2; Properties: Light amber to colourless clarified liquid with an oily odour. Parameters: Content >99.9%, Acid value/360, Saponification value/361, Iodine value/0.18, Fatty acid composition: C8 is 59.5, C10 is 40.1. Name of octanedecanoic acid Chinese name Octanedioic acid English name Nonanoic acid Physical and chemical properties of octanedecanoic acid Boiling point 254.5ºC Melting point 12.4ºC Molecular formula C9H18O2 Molecular weight 158.23800 Precise mass 158.13100 PSA 37.30000 LogP 2.82160 Octanedioic Acid Safety Information Customs code 2942000000 Octanedioic acid Customs Customs Code 2942000000 Fatty acids are a class of carboxylic acid compounds consisting of hydrocarbon groups linked to carboxylic acids. They are widely used as raw materials in various industries and as intermediate products in the chemical synthesis of antibacterial pesticides and other products. It is used as a raw material for plasticizers, stabilizers and flame retardants in the plastics industry; lubricants, rust inhibitors and hydraulic fluids in the petroleum and metalworking industries; surfactants for textile coatings and mineral processing; the production of alkyl chlorides of agricultural products, methyl octanoate; and synthetic triglycerides of caprylicacid, pentaerythritol esters and polyol esters as metal lubricants, lubricants and emollients for personal care products. https://www.newtopchem.com/archives/42953 Technical and business contact number: Manager Wu +86-183-0190-3156
    Type
    New
    Price
    Rs.10 (PKR)
    Status
    In stock
    0 Comments 0 Shares
  • AEEA 2-(2-aminoethylamino)ethanol CAS111-41-1
    Rm1104 ,No. 258, West SongXing Road, BaoShan District, Shanghai, China.
    AEEA 2-(2-aminoethylamino)ethanol CAS111-41-1
    AMINOETHYLETHANOLAMINE (AEEA)
    CAS: 111-41-1
    Overview:
    IUPAC name: 2-(2-aminoethylamino)ethanol
    Other Chimical Names: 2-(2-AMINOETHYLAMINO)ETHANOL;AMINOETHYLETHANOLAMIN;AMINOETHYLETHANOLAMINE;AMINOETHYETHANOLAMINE;AEEA;HYDROXYETHYL-ETHYLENEDIAMINE;LABOTEST-BB LTBB000455;N-HYDROXYETHYL-1,2-ETHANEDIAMINE
    MF: C4H12N2O
    MW: 104.15
    CAS: 111-41-1
    Physical and Chemical Properties:
    Physical state (25°C): viscous liquid
    Colour: Colorless
    Boiling point/range: 243°C/1013hPa
    Flash Point: 132℃/1013hPa
    Viscosity: 141mPa.s@20℃
    Relative density: 1.026g/cm3@25℃
    Solubility(ies): Water Soluble
    Features and uses:
    AMINOETHYLETHANOLAMINE (AEEA) CAS: 111-41-1 contains primary and secondary amines
    Linear molecular structure of groups. AEEA is a colorless liquid, have higher viscosity than ethylenediamine
    (EDA) and diethylenetriamine (DETA) . AMINOETHYLETHANOLAMINE (AEEA) has unique properties and is commonly used in the production of detergents, fabric softeners
    Chemical intermediates for agents, chelating agents, fuel additives and coatings.
    Storage Information:
    Store in a cool and ventilated warehouse. Keep away from fire and heat source. Keep out of direct sunlight. Keep the container sealed. It should be stored separately from oxidants and edible chemicals, and avoid mixed storage. Fire fighting equipment of corresponding variety and quantity shall be provided. The storage area shall be equipped with leakage emergency treatment equipment and suitable storage materials.
    Package:
    200KG/Plastic Bucket
    https://www.newtopchem.com/archives/39156
    AEEA 2-(2-aminoethylamino)ethanol CAS111-41-1 AMINOETHYLETHANOLAMINE (AEEA) CAS: 111-41-1 Overview: IUPAC name: 2-(2-aminoethylamino)ethanol Other Chimical Names: 2-(2-AMINOETHYLAMINO)ETHANOL;AMINOETHYLETHANOLAMIN;AMINOETHYLETHANOLAMINE;AMINOETHYETHANOLAMINE;AEEA;HYDROXYETHYL-ETHYLENEDIAMINE;LABOTEST-BB LTBB000455;N-HYDROXYETHYL-1,2-ETHANEDIAMINE MF: C4H12N2O MW: 104.15 CAS: 111-41-1 Physical and Chemical Properties: Physical state (25°C): viscous liquid Colour: Colorless Boiling point/range: 243°C/1013hPa Flash Point: 132℃/1013hPa Viscosity: 141mPa.s@20℃ Relative density: 1.026g/cm3@25℃ Solubility(ies): Water Soluble Features and uses: AMINOETHYLETHANOLAMINE (AEEA) CAS: 111-41-1 contains primary and secondary amines Linear molecular structure of groups. AEEA is a colorless liquid, have higher viscosity than ethylenediamine (EDA) and diethylenetriamine (DETA) . AMINOETHYLETHANOLAMINE (AEEA) has unique properties and is commonly used in the production of detergents, fabric softeners Chemical intermediates for agents, chelating agents, fuel additives and coatings. Storage Information: Store in a cool and ventilated warehouse. Keep away from fire and heat source. Keep out of direct sunlight. Keep the container sealed. It should be stored separately from oxidants and edible chemicals, and avoid mixed storage. Fire fighting equipment of corresponding variety and quantity shall be provided. The storage area shall be equipped with leakage emergency treatment equipment and suitable storage materials. Package: 200KG/Plastic Bucket https://www.newtopchem.com/archives/39156
    Type
    New
    Price
    Rs.10 (PKR)
    Status
    In stock
    0 Comments 0 Shares
  • NT CAT T CAS:2212-32-0 Analysis and Precautions
    Rm1104 ,No. 258, West SongXing Road, BaoShan District, Shanghai, China.
    NT CAT T CAS:2212-32-0 Analysis and Precautions

    Introduction.
    CAS No.:2212-32-0
    Molecular Formula: (CH3)2NCH2CH2N(CH3)CH2CH2OH
    Molecular weight: 146.23
    Chinese name: 2-{[2-(dimethylamino)ethyl]methylamino}ethanol
    English name: 2-{[2-(Dimethylamino)ethyl]methylamino}ethanol
    English alias: 2-{[2-(Dimethylamino)ethyl]methylamino}ethanol
    Precise molecular weight/precise mass: 146.23

    Molecular structure.
    1、 Molar refractive index: 43.45
    2. Molar volume (m3/mol): 156.0
    3、 Isotropic specific volume (90.2K): 378.7
    4、 Surface tension (dyne/cm): 34.6
    5、 Dielectric constant (F/m): not available
    6、 Dipole distance (D): not available
    7、 Polarization rate (10 -24cm 3): 17.22

    Oil-water partition coefficient / LogP.
    LogP value refers to the logarithmic value of the partition coefficient of a substance in the n-octanol/water two-phase system, reflecting the partition of the substance in the oil-water two-phase. The larger the LogP value, the more lipophilic the substance is; conversely, the smaller the LogP value, the more hydrophilic the substance is.

    Product use.
    Trimethylhydroxyethyl ethylenediamine is a low odor reactive foaming catalyst.
    Trimethylhydroxyethyl ethylene diamine is mainly used as a catalyst for polyether-based polyurethane flexible foam, molded foam, semi-rigid foam and rigid foam, and is especially recommended for automotive foam.

    Applications.
    2-{[2-(dimethylamino)ethyl]methylamino}ethanol (dmemH) has been used for the preparation of new iron clusters:
    [Fe7O4 (O2CPh) 11 (dmem) 2]
    [Fe7O4 (O2CMe) 11 (dmem) 2]
    [Fe6O2 (OH) 4 (O2CBut) 8 (dmem) 2]

    Conditions to be avoided.
    Heat, flame and sparks.

    Incompatible substances.
    Strong oxidizing agent, strong acid

    Waste disposal methods:
    This explosive product can be burned in a chemical incinerator with post-combustion treatment and scrubbing action
    Dispose of the remaining and non-recyclable solution to a licensed company.
    Contact a licensed professional waste disposal facility to dispose of the substance.
    Contaminated containers and packaging
    Dispose of as unused product.

    Safety Information.
    Hazardous Transport Code: Not available
    Hazardous Material Marking: Irritant
    Safety Marking: S26
    Hazardous Marking: R36/37/38

    Description of necessary first aid measures.
    Consult a physician for general advice. Show this safety technical note to the physician who arrives at the scene.
    Inhalation
    If inhaled, move patient to fresh air. If breathing stops, perform artificial respiration. Consult a physician.
    Skin contact
    Flush with soap and plenty of water. Consult a physician.
    Eye contact
    Flush thoroughly with plenty of water for at least 15 minutes and consult a physician.
    Ingestion
    Do not induce vomiting. Do not give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.

    Storage and transportation.
    Should be kept sealed and stored in a dry, cool and ventilated warehouse

    Packaging.
    200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. Please fasten the lid of the package as soon as possible after the original packaging to prevent the mixing of other substances such as moisture from affecting the performance of the product. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits.
    https://www.newtopchem.com/archives/40573
    NT CAT T CAS:2212-32-0 Analysis and Precautions Introduction. CAS No.:2212-32-0 Molecular Formula: (CH3)2NCH2CH2N(CH3)CH2CH2OH Molecular weight: 146.23 Chinese name: 2-{[2-(dimethylamino)ethyl]methylamino}ethanol English name: 2-{[2-(Dimethylamino)ethyl]methylamino}ethanol English alias: 2-{[2-(Dimethylamino)ethyl]methylamino}ethanol Precise molecular weight/precise mass: 146.23 Molecular structure. 1、 Molar refractive index: 43.45 2. Molar volume (m3/mol): 156.0 3、 Isotropic specific volume (90.2K): 378.7 4、 Surface tension (dyne/cm): 34.6 5、 Dielectric constant (F/m): not available 6、 Dipole distance (D): not available 7、 Polarization rate (10 -24cm 3): 17.22 Oil-water partition coefficient / LogP. LogP value refers to the logarithmic value of the partition coefficient of a substance in the n-octanol/water two-phase system, reflecting the partition of the substance in the oil-water two-phase. The larger the LogP value, the more lipophilic the substance is; conversely, the smaller the LogP value, the more hydrophilic the substance is. Product use. Trimethylhydroxyethyl ethylenediamine is a low odor reactive foaming catalyst. Trimethylhydroxyethyl ethylene diamine is mainly used as a catalyst for polyether-based polyurethane flexible foam, molded foam, semi-rigid foam and rigid foam, and is especially recommended for automotive foam. Applications. 2-{[2-(dimethylamino)ethyl]methylamino}ethanol (dmemH) has been used for the preparation of new iron clusters: [Fe7O4 (O2CPh) 11 (dmem) 2] [Fe7O4 (O2CMe) 11 (dmem) 2] [Fe6O2 (OH) 4 (O2CBut) 8 (dmem) 2] Conditions to be avoided. Heat, flame and sparks. Incompatible substances. Strong oxidizing agent, strong acid Waste disposal methods: This explosive product can be burned in a chemical incinerator with post-combustion treatment and scrubbing action Dispose of the remaining and non-recyclable solution to a licensed company. Contact a licensed professional waste disposal facility to dispose of the substance. Contaminated containers and packaging Dispose of as unused product. Safety Information. Hazardous Transport Code: Not available Hazardous Material Marking: Irritant Safety Marking: S26 Hazardous Marking: R36/37/38 Description of necessary first aid measures. Consult a physician for general advice. Show this safety technical note to the physician who arrives at the scene. Inhalation If inhaled, move patient to fresh air. If breathing stops, perform artificial respiration. Consult a physician. Skin contact Flush with soap and plenty of water. Consult a physician. Eye contact Flush thoroughly with plenty of water for at least 15 minutes and consult a physician. Ingestion Do not induce vomiting. Do not give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. Storage and transportation. Should be kept sealed and stored in a dry, cool and ventilated warehouse Packaging. 200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. Please fasten the lid of the package as soon as possible after the original packaging to prevent the mixing of other substances such as moisture from affecting the performance of the product. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits. https://www.newtopchem.com/archives/40573
    Type
    New
    Price
    Rs.10 (PKR)
    Status
    In stock
    0 Comments 0 Shares
More Stories