PU Catalyst: BDMA (benzyldimethylamine) CAS:103-83-3 Over view: Common Name: Benzyl Dimethyl Amine Other Chemical Names: N,N-Dimethylbenzylamine, Benzenemethamine, N,N-dimethyl-;Benzenemethanamine,N,N-dimethyl-;Benzylamine, Physical and chemical properties: Appearance Form: transprant light yellow liquid Odour no data available PH 10 at 10 g/l at 20 °C Melting point/freezing point Melting point/range: -75 °C - lit. Initial boiling point and boiling range 181 - 184 °C at 1.020 hPa - lit. Flash point 53 °C - closed cup Evaporation rate no data available Flammability (solid, gas) Upper explosion limit: 6,3 %(V) Upper/lower flammability or explosive limits Lower explosion limit: 0,9 %(V) Relative density 0,9 g/cm3 at 25 °C Water solubility soluble Partition coefficient: noctanol/water log Pow: 1,87 Molar formular C9H13N Molar mass 135.21 Features and uses: A liquid tertiary amine catalyst. Can improve foam cure and demolding time. It is an excellent candidate to consider for use in water-NCO reaction in rigid polyurethane foams. BDMA is typically suitable to replace DMCHA in formulations using a high level of water as blowing or co-blowing agent can reduce surface friability and improve adhesion of foam to substrates. BDMA promotes the urethane reaction and is commonly used in high-water rigid foam applications to reduce friability. It has a characteristic but low amine odor, and is soluble in water and in most organic solvents. BDMA is used in flexible slabstock and rigid foam applications. It promotes the urethane reaction and is commonly used in high-water rigid foam applications to reduce friability. BDMA is also used for flexible slabstock foam applications. Storage Information Recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products' performance in the end use. Package: 180KG/Steel Drum (DABCO BDMA/Niax BDMA/ PC Cat NP60/ Addocat DB/ Jeffcat BDMA/ Lupragen N103) More :https://www.newtopchem.com/archives/516

N-methyl-Methylcyclohexylamine CAS 100-60-7 Descriptions： Synonyms： Cyclohexylmethylaminecyclohexyl-methyl-aminemethylcyclohexylamine,[corrosivelabel]Cyclohexylamine,N-methyl-1-MethylcyclohexylamineCyclohexanamine,N-methyl-MethylcyclohexylamineN-Cyclohexylmethylamine CAS No.：100-60-7 Molecular Formula：C7H15N ( Isomeride) Molecular Weight：113.204 EINECS：202-869-3 Category：Pharmaceutical Intermediates Physicochemical properties Density：0.868 Melting point：-8℃ Boiling point：149℃ Refractive index：1.4545-1.4565 Flash point：29℃ Vapor pressure：4.62mmHg at 25°C PSA：12.03000 logP：1.92940 Appearance：transparent and colorless liquid Color： colorless liquid Physical Property：transparent and colorless liquid， Miscible with various organic solvents, slightly soluble in water。Melting point：＆＃8722；9-＆＃8722；7＆＃160；＆＃x00b0；C(lit.) Boiling point：149＆＃160；＆＃x00b0；C(lit.) Density：0.868＆＃160；g/mL＆＃160；at 25＆＃160；＆＃x00b0；C(lit.) Refractive index：n20/D 1.456(lit.) Flash point：85＆＃160；＆＃x00b0；F Water solubility：5.4 g/100 mL (20 ＆＃186；C) transparent and colorless liquid. Miscible with various organic solvents, slightly soluble in water。 transparent and colorless liquid。 Boiling point 147~151℃ Relative density 0.868 Refractive index 1.4456 Flash point 29℃ Solubility Miscible with various organic solvents, slightly soluble in water Solubility：Slightly soluble in water, soluble in benzene, alcohol, etc Application： Used as intermediates in medicine and dyes Pharmaceutical and dye intermediates. Used as an intermediate in the drug bromohexamine hydrochloride Production Method： With cyclohexylamine as raw material prepared. 2. By the reaction of cyclohexanone and methylamine. Soak aluminum sheet in methanol, add high mercury chloride, continue to soak 2h, temperature rise does not exceed 55℃, remove the soaking liquid. Add ethanol to the activated aluminum sheet, drop the mixture of methylamine and cyclohexanone under agitation, heat reflux, and place overnight. Adding 10% sodium hydroxide solution alkalization, extracting with benzene twice, after washing by distillation, benzene recovery that distillation of n-methyl cyclohexylamine. The yield is about 80%. ; Storage and transport information：： It should be sealed and stored in a dry and cool ventilated warehouse Packaging： 200KG/ drum storage: It is recommended to store in dry and cool areas and properly ventilated. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene. Contact Us SHANGHAI OHANS CO., LTD. Factory Address ：Jining High-tech Development Zone, Shandong, China Call Center ：021-5161-9971 Headquarters ：Room a2110, building 55, No. 709, Lingshi Road, Zhabei District, Shanghai Email Us ：honda@ohans.com candy@ohans.com More：https://www.ohans.com/n-methyl-methylcyclohexylamine-cas-100-60-7-pdf/

cyclohexylamine CAS 108-91-8 Descriptions： Product:cyclohexylamine Synonyms： Cyclohexylamine(6CI,8CI);1-Aminocyclohexane;1-Cyclohexylamine;Aminocyclohexane;Aminohexahydrobenzene;Benzenamine, hexahydro-;Hexahydroaniline; Monocyclohexylamine Molecular Formula:C6H13N Molecular Weight:99.17 CAS:108-91-8 EINECS:203-629-0 InChI:1S/C6H13N/c7-6-4-2-1-3-5-6/h6H,1-5,7H2 Physical and chemical properties： Melting point: -17ºC Boiling point: 133-134ºC Water solubility: MISCIBLE Refractive index: 1.458-1.46 Flash point: 27ºC Density: 0.867 Properties descriptions: Colorless and transparent liquid，stimulating odor,freezing point -17.7℃，Boiling point 134℃，36.4℃（2.66kPa），Relative density0.8647（25/25℃），0.8191（20/4℃），Refractive index1.4585（20℃），Flash point（open cup）32.22℃。Miscible with water and general organic solvents,including alcholos,esters,ketones, ethers, aliphatic, hydrocarbons, aromatic hydrocarbons and chlorine-containing compounds. Form an azeotrope with water, boiling point 96.4℃，containing water 55.8℃。It has strong organic base properties, and the PH value of 0.01 aqueous solution is 10.5. Safety information： Safety descriptions: S45：If have an accident or feel unwell, go to your doctor for help immediately (preferably with a product container label). S1/2：Keep sealed and keep away from children. S36/37/39：Wear appropriate protective clothing, gloves and use goggles or face masks Dangerous mark:C：Corrosive substance Risk code : R10：Flammable。 R34：Causes burns. R21/22：Harmful in contact with skin and if swallowed. UN code:UN2357 MSDS report: cyclohexylamine MSDS report Storage： It should be sealed and stored in a dry and cool ventilated warehouse. Packaging： 200KG/drum storage：It is recommended to store in dry and cool areas and properly ventilated. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene. Contact Us SHANGHAI OHANS CO., LTD. Factory Address ：Jining High-tech Development Zone, Shandong, China Call Center ：021-5161-9971 Headquarters ：Room a2110, building 55, No. 709, Lingshi Road, Zhabei District, Shanghai Email Us ：honda@ohans.com candy@ohans.com More：https://www.ohans.com/cyclohexylamine-cas-108-91-8-pdf/