DMAEE CAS:1704-62-7 Usage and Manufacturing Method Brief introduction. Dimethyldiethanolamine is a chemical substance. Alias: Dimethylaminoethoxyethanol Abbreviation: DMAEE English name: dimethyaminoethoxyethanol, dimethyl2-(2-aminoethoxy)ethanol Molecular formula: C6H15NO2 Relative molecular weight:133.2 CAS No.:1704-62-7 Formulation. Recipe weight:133.19 Purity percentage: ≥98.0% (GC) Physical form: Liquid Experimental operation. [ 50-00-0 ] + [ 929-06-6 ] = [ 1704-62-7 ] Phase I: 0.5 hr. Phase II: 100 - 110 °C; 2 h. Phase III: 120 °C; 4 h. Synthesis To a 250 ml three-necked flask was added 63.1 g of diethyleneglycolamine (0.6 mol), 34.5 g of paraformaldehyde (1.2 mol), stirred for 30 min and 63 g of formic acid (1.2 mol, 88%) was added dropwise at a temperature of 100 to 110 °C and reacted at about 100 °C for 1 h. Distill out 30 g under reduced pressure (vacuum - 0.094 MPa, kettle temperature 80°C). The distillation ended with 90.0% product and 9.8% impurity (S-2) content. _: The liquid from step 2) was transferred to a 500 ml distillation flask and distilled under reduced pressure at a vacuum of -0.094 mpa. 62°C component was n-butanol ester exchanged down to formic acid as butanol, 121° C DMAEE component that is the product. Collected 121 ° C component 128.3g, yield 96.5%, the Uses. DMAEE is a low odor reactive foaming catalyst, mainly used in rigid packaging foam, also used in molded flexible foam and polyether urethane flexible foam.DMAEE is also an important intermediate, used in polyurethane coatings, surfactants, mine reinforcement and many other fields. Zhongke's organic amine catalyst and curing agent series products will be put into production one after another, and the core catalyst and curing agent products will be used as the basis for the subsequent development of new materials for high value-added polyurethane and epoxy resin by precisely matching the market changes. Integrated manufacturing method of dmae and dmaee in microtubular reactor. A method of integrated preparation of DMAE and DMAEE in microtube reactor is disclosed, which includes the following steps in turn: pumping ethylene oxide and aqueous dimethylamine solution formed by mixing dimethylamine with water as catalyst as materials into the microtube reactor respectively, controlling the molar ratio of ethylene oxide to dimethylamine as 1~2:1; setting the reaction temperature in the microtube reactor as 60~90°C and pressure as 1.3 ±0.2 Pa, and the residence time of the material in the microtubular reactor is controlled to be 15～90s; the effluent from the microtubular reactor is an aqueous solution of DMAE and DMAEE. The method of the present invention has the advantages of high atomic economy, good reaction selectivity, mild reaction conditions, short reaction time, simple catalyst, and simple product separation. Safety information : Risk terminology R21:Harmful in contact with skin. R41:Risk of serious damage to the eyes. Safety Terminology S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39:Wear suitable protective clothing, gloves and eye/face protection. Storage and transportation. Should be kept sealed and stored in a dry, cool, ventilated warehouse Packaging. 200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging , please fasten the lid as soon as possible to prevent the mixing of other substances such as moisture to affect the performance of the product. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits. https://www.newtopchem.com/archives/40565

CAS: 90-72-2 2,4,6-Tris(dimethylaminomethyl)phenol Production Process and Method Brief introduction. 2,4,6-tris(dimethylaminomethyl)phenol, an organic chemical substance, molecular formula: C15H27N3O. Chinese name: 2,4,6-tris(dimethylaminomethyl)phenol Foreign name: 2,4,6-Tris(dimethylaminomethyl)phenol English alias: 2,4,6-tris[(dimethylamino)methyl]phenol Alias: Epoxy accelerator DMP-30; Tris(dimethylaminomethyl)phenol Appearance: transparent liquid Chemical formula: C15H27N3O Molecular weight: 271.4314 CAS No.: 90-72-2 EINECS number: 202-013-9 Boiling point: 320.50 ℃ Density: 1.054 g/cm³ Flash point: 116.63 ℃ Refractive index: 1.517 Epoxy resin curing accelerator DMP-30 is 2,4,6 tris(dimethylaminomethyl)phenol, which is a tertiary amine curing agent. It can be used as an epoxy resin curing agent at room temperature, and also as an efficient accelerator for acid anhydride, polyvinylamine and aliphatic polyamine curing agents. This product contains phenolic hydroxyl group in its molecular structure, so the activity is increased and it can be used for fast curing, mainly for thermosetting epoxy resin curing agent and adhesive, and it can be used as accelerator of acid anhydride curing agent and amide curing agent for casting and pressure layer products, the amount of this product as curing agent is generally about 3-13%, and the amount as accelerator is generally 0.1-3%. This product can be used as a catalyst in rubber anti-ozone agent and rigid polyurethane foam raw material combination polyether. Production process. 2000L reaction kettle, 200kg of phenol, 720kg of dimethylamine, 520kg of formaldehyde added dropwise below 50 degrees. kg, after drop addition, raise the temperature to 70 degrees, keep warm for 2 hours, lower the temperature to 50 degrees, add 100 kg of sodium chloride Sodium chloride, stir, let stand, stratify, and dehydrate the crude product under pressure. Method of preparation. After the reaction of phenol with dimethylamine and formaldehyde, the reaction products are stratified, dehydrated under vacuum and filtered to obtain the finished product. Theoretical unit consumption: (one ton of product) Phenol: 400 kg Dimethylamine (40% aqueous solution) 1440kg Formaldehyde (37% aqueous solution) 1040kg Produce waste water about 1.8 tons, mainly containing a small amount of formaldehyde Dosage: As accelerator dosage is about 1~5% As a curing agent dosage of about 10% Application areas. Use one Used as curing agent for thermosetting epoxy resin, adhesive, binder for laminate material and flooring, acid neutralizer and catalyst in polyurethane production Application 2 Used as antioxidant, also used in dye preparation Application 3 Used as curing agent for thermosetting epoxy resin, adhesive, sealant for laminate materials and flooring, acid neutralizer and catalyst in polyurethane production. Numbering system. CAS No.: 90-72-2 MDL No.: MFCD00008330 EINECS No.: 202-013-9 RTECS No.: SN3500000 BRN No.: 795751 PubChem No.: 24900319 Safety information. Package Class: III Hazard Class: 8 Customs Code: 29222900 Dangerous Goods Transport Code: UN 2735 8/PG 3 WGK Germany: 1 Hazardous category code: R22; R36/38 Safety instructions: S26-S28-S2 RTECS number: SN3500000 Dangerous Goods Marking: Xn Safety terminology. S26 - Immediately after inadvertent contact with eyes, flush with plenty of water and seek medical advice. S28 - Immediately after inadvertent contact with skin, flush with plenty of soapy water. S2 - Avoid contact with children. S61 - Avoid release into the environment. Refer to special instructions/safety data sheet. S45 - In case of accident or discomfort, seek immediate medical attention (if possible, show its label). S36/37/39 - Wear appropriate protective clothing, gloves and goggles or mask. Storage and transportation. Should be kept sealed and stored in a dry, cool and ventilated warehouse Packaging. 200KG/drum Storage: It is recommended to store in dry and cool area with proper ventilation. After the original packaging, please fasten the lid as soon as possible to prevent the mixing of other substances such as moisture to affect the performance of the product. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits. https://www.newtopchem.com/archives/39733

Dicyclohexylamine CAS 101-83-7 Descriptions： Product:Dicyclohexylamine Synonyms:N,N-Dicyclohexylamine;Perhydrodiphenylamine;DCHA Molecular Formula:C12H23N Molecular Weight:181.32 CAS:101-83-7 EINECS:202-980-7 InChI:1S/C12H23N/c1-3-7-11(8-4-1)13-12-9-5-2-6-10-12/h11-13H,1-10H2 Physicochemical properties： Melting point: -2ºC Boiling point: 256ºC Water solubility: 1G/L(20ºC) Refractive index: 1.4832-1.4852 Flash point: 103ºC Density: 0.912 Properties descriptions: Colorless transparent oil liquid,pungent ammonia smell，flammable and high toxic. Melting point is about 20℃，Freezing point-2℃，Boiling point 255.8℃（Decomposition），87-93℃（1.73kPa），Relative density0.9103（20、4℃），Refractive index 1.4823，1.4842，Flash point 96℃。Miscible with organic solvents, slightly soluble in water, strongly alkaline. Safety information： Safety descriptions:S26：in case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S45：If you have an accident or feel unwell, go to your doctor for help immediately (preferably with a product container label). S60：The substance residues and containers must be disposed of as hazardous waste S61：Avoid discharge of this substance residue into the environment. Refer to special instructions/safety data sheets. S36/37/39：Wear appropriate protective clothing, gloves and use goggles or face masks. Dangerous mark:C：Corrosive substance N：Environmental hazardous substance Risk codes: R22：Harmful if swallowed. R34：Causes burns R50/53：Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. UN code :UN2565 MSDS report: Dicyclohexylamine MSDS report Storage and transport information： It should be sealed and stored in a dry and cool ventilated warehouse Other information： Product application:Used in organic synthesis and as insecticide, acid gas absorbent, steel anti-rust agent. Production method and others: Dicyclohexylamine was prepared by hydrogenation of aniline at high temperature and high pressure in the presence of catalyst. Packaging： 200KG/ drum storage: It is recommended to store in dry and cool areas and properly ventilated. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene. Contact Us SHANGHAI OHANS CO., LTD. Factory Address ：Jining High-tech Development Zone, Shandong, China Call Center ：021-5161-9971 Headquarters ：Room a2110, building 55, No. 709, Lingshi Road, Zhabei District, Shanghai Email Us ：honda@ohans.com candy@ohans.com More：https://www.ohans.com/dicyclohexylamine-cas-101-83-7-pdf/

N-Ethylcyclohexylamine CAS 5459-93-8 Descriptions： Product: N-Ethylcyclohexylamine Synonyms: N-Cyclohexylethylamine Molecular Formula: C8H17N Molecular Weight: 127.23 CAS:5459-93-8 EINECS: 226-733-8 InChI: 1S/C8H17N/c1-2-9-8-6-4-3-5-7-8/h8-9H,2-7H2,1H3 Physicochemical properties： Boiling point: 165ºC Refractive index: 1.452 Flash point: 111ºF Density: 0.844 Safety instruction： Safety instruction: S26： in case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S45：If you have an accident or feel unwell, go to your doctor for help immediately (preferably with a product container label). S36/37/39：Wear appropriate protective clothing, gloves and use goggles or face masks. Dangerous mark: C：Corrosion substance Risk Codes: R10：Flammable。 R35：Causes severe burns。 R20/21/22：Harmful by inhalation, in contact with skin and if swallowed. Application： Product application: Pharmaceutical, pesticide intermediate, polyurethane catalyst Storage and transport information： It should be sealed and stored in a dry and cool ventilated warehouse Packaging： 200KG/ drum storage: It is recommended to store in dry and cool areas and properly ventilated. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene. Contact Us SHANGHAI OHANS CO., LTD. Factory Address ：Jining High-tech Development Zone, Shandong, China Call Center ：021-5161-9971 Headquarters ：Room a2110, building 55, No. 709, Lingshi Road, Zhabei District, Shanghai Email Us ：honda@ohans.com candy@ohans.com More：https://www.ohans.com/n-ethylcyclohexylamine-cas-5459-93-8-pdf/

cyclohexylamine CAS 108-91-8 Descriptions： Product:cyclohexylamine Synonyms： Cyclohexylamine(6CI,8CI);1-Aminocyclohexane;1-Cyclohexylamine;Aminocyclohexane;Aminohexahydrobenzene;Benzenamine, hexahydro-;Hexahydroaniline; Monocyclohexylamine Molecular Formula:C6H13N Molecular Weight:99.17 CAS:108-91-8 EINECS:203-629-0 InChI:1S/C6H13N/c7-6-4-2-1-3-5-6/h6H,1-5,7H2 Physical and chemical properties： Melting point: -17ºC Boiling point: 133-134ºC Water solubility: MISCIBLE Refractive index: 1.458-1.46 Flash point: 27ºC Density: 0.867 Properties descriptions: Colorless and transparent liquid，stimulating odor,freezing point -17.7℃，Boiling point 134℃，36.4℃（2.66kPa），Relative density0.8647（25/25℃），0.8191（20/4℃），Refractive index1.4585（20℃），Flash point（open cup）32.22℃。Miscible with water and general organic solvents,including alcholos,esters,ketones, ethers, aliphatic, hydrocarbons, aromatic hydrocarbons and chlorine-containing compounds. Form an azeotrope with water, boiling point 96.4℃，containing water 55.8℃。It has strong organic base properties, and the PH value of 0.01 aqueous solution is 10.5. Safety information： Safety descriptions: S45：If have an accident or feel unwell, go to your doctor for help immediately (preferably with a product container label). S1/2：Keep sealed and keep away from children. S36/37/39：Wear appropriate protective clothing, gloves and use goggles or face masks Dangerous mark:C：Corrosive substance Risk code : R10：Flammable。 R34：Causes burns. R21/22：Harmful in contact with skin and if swallowed. UN code:UN2357 MSDS report: cyclohexylamine MSDS report Storage： It should be sealed and stored in a dry and cool ventilated warehouse. Packaging： 200KG/drum storage：It is recommended to store in dry and cool areas and properly ventilated. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene. Contact Us SHANGHAI OHANS CO., LTD. Factory Address ：Jining High-tech Development Zone, Shandong, China Call Center ：021-5161-9971 Headquarters ：Room a2110, building 55, No. 709, Lingshi Road, Zhabei District, Shanghai Email Us ：honda@ohans.com candy@ohans.com More：https://www.ohans.com/cyclohexylamine-cas-108-91-8-pdf/